Welding a nut to the broken bolt is the easiest way.
New OHSHIT! Warning labels here: https://www.etsy.com/ca/listing/1211694196/oshit-warning-labels
New OHSHIT! Warning labels here: https://www.etsy.com/ca/listing/1211694196/oshit-warning-labels
We're on this excavator nothing runs like uh. It runs away like a deer or smells like a john. We got a busted bolt which we got to extract. Probably the best case scenario, just sheared right off and the thing is brand used.
So ought not be too much there's many options to get out of broken bolts, starting with the simplest and least invasive ending, with the most invasive and, most time consuming. Of course, you start off just with a cold chisel or a center punch and tappy tap tap. Try and work that busted fastener. Of course you can die, grind a slot in the end of it and try and turn it out with a screwdriver we're going to jump straight to the left-hand drill.
But it's like to keep these around what for messing with the apprentices. I got the opposite side twist, sinister handed twist, so this is a typical drill bit right hand, there's a left hand, which happens to coincide with backing the threaded fastener out. So if it bites, you you're gon na drill the hole anyway, because next on the list is the extractors. You drill a hole and then you punch these in and then turn them out that way and, of course, there's the heat and beat with the torch.
You use the power of differential expansion, you heat up the bolt, it expands and you let it cool down shrinkifies in the hole and maybe backs out a little easier. If that don't work, we can always weld a nut which allows you to put a wrench on it, and it also enjoys the embedment of differential expansion as well. This no, it doesn't fit ugh kind of in a terrible spot, not much purchase to be had we'll. Try and just back it off.
Oh, it started to move and then stopped. Oh there we go pretty common, modern day, love story between a man and his gear. I got in there with my little topper. I figured she was a goer and uh.
She froze right up on me. We haven't even got into the heavy breathing, let alone oh wrong way, let alone that red hot curse, words and rage. The drill is cutting good. It's just.
I got no purchase to really give some feed pressure on there. You see it's just kind of idling along making powder chips, left-handed drill bits not going to work. I don't think. Yes, i think the problem it just had a little hang badang.
So once we're past that, where the threads are buggered we'll be fine, i'm pounding on that cork stover, like a monkey at the zoo, since i got ta, get the electric glue out anyway, but for an act in the repair we might as well get a nut. While we're at it, no not in there and disconnect the battery put the ground as close as possible to the work that way, we won't fry the computer i'll take the ground off. It's got less crap on there. You pieces proofing, the puddings in the eating of the currents easiest way get a broken bolt out of a hole is with the hot metal glue gun, do not stare into the pretty blue light.
What happened to your wrist? Noticed the scar.
Was it a “date night” accident?
Or protecting the critters from a drunken horny dewclaw?
These days being the impatient type I just head straight for the MIG in this kind of situation. I try and fill the nut in one go to get max heat into the bolt. Usually let it cool some too. Good work 😀
Use that fancy wood splitter to squeeze some oil from all those geese and oil that stud up . Loosen it right up.
This is all bullshit…. All you need is a bit of fluroantimonic acid and that offending nut/bolt is a second thought… Yeeeesh..
drill hole and hammer in torx bit (not security style bits) works really good, bit of heat if shes crusty haha
If it ain't one thing, it's another… Especially when it's already somethin… Thanks for sharing!
The Prime minister of Australia should take not “DO NOT STSRE INTO PRETTY BLUE LIGHT” maybe we could send him a couple 😂
I'm surprised John Deere let you work on your own equipment like that being all 'anti right to repair' and everything.
If the old lefty don't bite just send her straight through and tap the inside of that old bolt. A helicoil if you will.
The timing of the universe: I just used my Hanson screw extractor set which has been idle for many years to back out a broken bold …
takes bunce times but try f150 did that like a million tines v8 arrrrrrrrrrr workes sone tie all the time
think it was 20 studes sucked
46 mainofollds f150 4×4
I feel like cutting a slot with a rotary dremel and taking it out with a screw driver would've been the easiest solution here
arrrrrrr felled a tree for200 americakin beanes . came with meat dear varaient nd beer / and wood good may first
loving livfe
another one of those: "can you do me a quick favor"… that turns into a slugfest with at least 4.5 swear words per minute…
Need you to test the new Linus Tech tips Screwdriver. They are claiming it is the greatest thing since sliced bread
My wife’s divorcing me because of erectile issues, but I refused to leave my house. She called the cops to have me removed and those were their direct orders! Remove Broken Stud 😂
usually when they need to remove a broken stud, they just call the bouncer and have him drag me out….
ask my ex wife,. she's got removing studs down to a fine art,. lol. well, she managed to remove me from her life quick smart. 👍😆