Errata: Silicon not Silica.

By AvvE

18 thoughts on “Crack inspector. weld al casting?”
  1. Avataaar/Circle Created with python_avatars Nex Pro says:

    What is that component for?

  2. Avataaar/Circle Created with python_avatars FennecTECH says:

    Ill risk my own life with a half assed pressure vessel. But certainly not the 70 pound lap dog and the babydoll And certainly not mini me AVE

  3. Avataaar/Circle Created with python_avatars Patrick Sweetman says:

    Today I learned something. Thank you.

  4. Avataaar/Circle Created with python_avatars FennecTECH says:

    Better not to chance it with a pressure vessel

  5. Avataaar/Circle Created with python_avatars Dave Webster says:

    The best thing about crack inspections is the high you feel when you finally find the crack!

  6. Avataaar/Circle Created with python_avatars SeanBZA says:

    That powder looks like it is easy to replace with some colour toner, as that is also magnetic in a lot of cases, and as a bonus you get it in 3 colours, so you can crack test 3 times and tell if a crack is from the first, second or third try to fix it.

  7. Avataaar/Circle Created with python_avatars Avi Tech says:

    As an aircraft mech and have my level III certs for NDT, I gotta say that was a pretty good explanations of NDT procedures.

  8. Avataaar/Circle Created with python_avatars Aaron Bidle says:

    Got to say uncle Bumble F has a way tell us all about stuff

  9. Avataaar/Circle Created with python_avatars Mike Oxlong says:

    *hunter starts heavy panting

  10. Avataaar/Circle Created with python_avatars Jeff Andrews says:

    for $35 .. you replace yours with a nice shiny new unit … and put your old one in his machine … 🤣

  11. Avataaar/Circle Created with python_avatars evantspurrell says:

    crouching plumber hidden crack

  12. Avataaar/Circle Created with python_avatars deltaunit7 says:

    I would be interested in seeing the same tests on the new part.

  13. Avataaar/Circle Created with python_avatars Thomas Doherty says:

    Genius as always 👍

  14. Avataaar/Circle Created with python_avatars Bob Papadopoulos says:

    If I want a laugh about Mountbatten vacations, that fishing trip to Mullaghmore is always my favorite.

  15. Avataaar/Circle Created with python_avatars dreadgnarr says:

    very timely as I am trying to weld the oil pan on an LS2

  16. Avataaar/Circle Created with python_avatars sumatoborukiSaru says:

    Upon receipt of the new part, I'd be lookin' for a way to keep that flange from curlin' up & lettin' tha angry cafè squirts out the incorrect orrfice.

  17. Avataaar/Circle Created with python_avatars Charles Boston says:

    tig welding it , easy peezy …… but for 35.00 for a new part , just go buy the new part , if it fails again , weld up the first one and make it stronger than original

  18. Avataaar/Circle Created with python_avatars Thomas Ives says:

    Hmm, maybe if somebody had a Haas milling machine, they could make a new part from billet. Nah, that would never happen ;p

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.