I inspect the build quality and sine wave output of a Samlex inverter. I also check the output of a lower cost Motomaster inverter. Thanks for your help! Early access to VJOs http://www.Patreon.com/AvE

By AvvE

11 thoughts on “Boltr: samlex inverter cheap vs. expensive”
  1. Avataaar/Circle Created with python_avatars Jeff Arp says:

    In my eyes, ye ol harborfreight is not looking so bad now.

  2. Avataaar/Circle Created with python_avatars WhatCaniLearnHere says:

    i salvage old backup inverters from various cell tower instalments and internet service providers. usually they just need new batteries (or just put jumper cables) not as efficient as "modified" sine wave, but real nice true sine (or kinda close on some) for running computers or audio, etc

  3. Avataaar/Circle Created with python_avatars Lukas says:

    Now i know why i spent 500 Euros on a 600 Watt Solar Inverter 🙂 Mine look a lot better inside and are properly rated and tested for pretty much anything you want to do with them.

  4. Avataaar/Circle Created with python_avatars bassmith448 bassist says:

    You just make me feel soooo Stoopid……

  5. Avataaar/Circle Created with python_avatars Dr. Meola says:

    So in layman's term when you mean push and pull system? Does that mean it keeps on changing polarity? By changing polarity back and forth is it trying to mimic alternating current?

  6. Avataaar/Circle Created with python_avatars rotaxtwin says:

    I find that soldering connections like the one that had failed are a bit tricky in that your instinct is to poor the heat and pile the solder on and you get a good connection. Problem is the metal components are cast into plastic, so you have to minimize the amount of heat applied. I melted the crap out of a switch like that a couple months back, then realized that you're supposed to use crimp lugs on it. This outlet connection is obviously not a crimp lug connection, but it is one of the (relatively) few that are done by hand and the person failed to apply enough heat and solder. I suspect that when you repaired it if you applied too much heat you could easily damage the outlet. Suspect being the key word.

  7. Avataaar/Circle Created with python_avatars StupidButtDumb says:

    The comments section on AvE videos is surprisingly productive…tot he point where I actually learned something. All that on videos full of dick and fart jokes. I think I found my people. Who'd a thunk it?…

  8. Avataaar/Circle Created with python_avatars WayneS World says:

    Little-er. Is than Canadan?

  9. Avataaar/Circle Created with python_avatars Frank Murphy says:

    At this point I'll pay a premium for whatever place will be easiest to return all these pieces of shit. Seriously. And apparently the world is so warped in on itself that that place is actually Canadian Tire.

  10. Avataaar/Circle Created with python_avatars Sam Jackson says:

    🙂

  11. Avataaar/Circle Created with python_avatars ARW says:

    I already got assaulted and assimilated and now you want me to get inverted. The demands of youtube are too much.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.