I mounted a treasured old vice to a new workbench. Some of you enjoyed my introduction to twist drills, here's a follow up. Drilling and tapping in metal. Genuine Steel metal to be precise; it's how vises from a bygone age were cast. Staring: Record Vise No. 3
GET YOUR VERY OWN AvE SHOP RULER: www.etsy.com/ca/listing/464202928
Long term projects here: http://www.Patreon.com/AvE
8-Bit March by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://www.twinmusicom.org/
GET YOUR VERY OWN AvE SHOP RULER: www.etsy.com/ca/listing/464202928
Long term projects here: http://www.Patreon.com/AvE
8-Bit March by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://www.twinmusicom.org/
Put a teat in, then bring your quill down…you touch my teat and I’ll thread your wazoo with a 1/4×20. And don’t even ask what I’ll do if you even get near my quill.
Come for the project. Come for the stickers
Get yourself a magnetic digital angle gauge and zero it to the surface you are tapping. Place it on the shank of the tap and you want to make sure the tap is plumb while you are starting it by checking the gauge in 2 places 90 degrees radially apart.
You can also just take a nut and thread it onto the tap and use that as a reference so you can keep the bottom of the nut parallel to the surface you are tapping. I did a big machining job on some 2 inch thick plates and I cut threads by hand tapping using the nut trick and I could not get a .002 feeler gauge anywhere underneath those fasteners after I had threaded them in.
If this guy wasn't a master everything mechanical I'd say he should slow down and use some loob. But apparently I have a thing or two to learn. Also. Music. What the hell is even that?
AvE – what kind of dark high sulfur cutting oil do you recommend for here in the states?
german Vergins? what planet you from?
If i could watch your vidjas for the rest of time, that would be skoocum
AvE… have you ever used that blue stick lube? That shit works awesome! It's like ducktape of weinerslidin. For cutting blades, drills, and tapps. Your wife will love it!
Everything made in cheating scum bag lack of quality control communist China SUCKS except for their vacuum cleaners. Never purchase or use safety or test equipment tools or LED'S from cheating china. Watch China harbor freight brand drill bits. Purchased a pack of 1/8" bits and would only drill thru warm butter. Nice to have an drill index of 135 degree still bits for drilling stainless steel.
anyone have knoledge on bobco vises? i have a super beefy 4 inch from grandad and im wondering if its worth the time fixing it up.
3/8" impact
The good thing about the finish on the irwins/fap-offs is they hold fluid a bit better
Wouldn't it have been easier to just drill straight threw the bench and use a nut and a bolt?
I get into trouble every time I go full Canadian.
Going full canadian cosists of making french and British seems useless (vimmey ridge). Eating beaver meat and drinking 10% beer