*NO SHOVELING*
25 cubic feet per hour; almost 1 yard/hr.
a) -scoop and weigh aggregate with tractor bucket
b) -transport and mix in tractor bucket
c) -place and dump with tractor bucket
d) *BONUS STEP* -automagic de-limbing of errant apprentii

Aside from the required arounds that is troubles between the steering wheel and the driver's seat, this thing has performed admirably janky as it is, i will say it's better to have some free board here. Betwixt, the between you want to load this side of the bucket. Keep it dry because if it packs in here you'll be digging it out, ain't no fun! Also, i found don't get greedy. If, if it'll do one bag of portland to four cubic feet of gravel, do that no more? No less! As it happens, i have some rages on here: ergo, instead of goon spooning it in we can just measure how much pressure is in the lift cylinder, and we know exactly how much gravel we got it's fan, tastic and then the extraneous leftovers.

We were picking those out, but then it kind of makes its own tunnel and you're picking it out. Every load is kind of stupid. You just leave it in there and clean it out at the end, because you're gon na get the same ratio after that. First, one anyway, all that stuff packed in there no big deal.

That's a perfect job for the apprentice, big arms and a little head make sure it's outside. Please. Somebody call for big irons and a little head hold my and pull it you're uh you're. Using up your empire dirt for for non-dirt reasons, oh you want me to hold it.

You got ta turn it up the butter! That's where you that's, where you put your friends, if you don't like them, little little dangle to the left little thing over the right. Oh yeah, all the dangle, you want. No, no you don't we got ta. Add the elixir of life aka hw2, h2.

Zh20. Look on the left a little from the right makes the feel all right. It's a hot day in the whole time today, wearing that one guy, the old guy, had to leave because a little sweaty around the head man only though only the young and the dumber left. Now you put the angle on the truck see.

This is actually straight for the angles on angle now, so everything jumps into the on the one side, motor side, xc, mixie, stuff's, pretty viscous, and that's how the worst slob of concrete gets bored. One thing to do on a breakdown right, take a break middle b. Time get your vitamin b. You already had miller eight.

No, it's not for me we're just about done, never fails, but the gear lets you down. We are averaging 20 25 cubic feet per hour, not great, but better than a 4 000 call out from a rolly truck. However, these guys supply junk. That's uh, yeah delta, p power, solenoid valve both of these 7.6 ohms.

I think they're okay chunk of schmoo or something in the valve body we're not getting any rotation on that motor when we actuate these they're clicking and clacking, but nothing happening. It's still curling the bucket so a good time for a break and we'll just pull those out make sure there's no schmoo in there and if not, we got back up holy. Oh spin me around and call me sally buy a lottery ticket. I made some of that doggy coin.

There she blows it's, the ghost of this morning's. That's down it's it's! The ghost of drilling the cylinder for a new fitting she's, a mighty bit dry. The mix might be off on this. That's all right! The dead bodies will make up the rest of the aggregate.
How many iron workers lost on this one. Just the souls of a couple concrete, finishers jimmy hoffa, definitely will not escape this time. How many uses you got for an electrician? Most people have none another job. Well done, screed it out, and the best part about finishing concrete is not giving a about what it looks like afterwards.

Well, it's having beer, not bad for some snow mexicans hot.

By AvvE

15 thoughts on “Tractor mixer better than shovel? *YES* Slop-Slinger 9000!”
  1. Avataaar/Circle Created with python_avatars HappyQuails says:

    Glad that wasn't my $4k he mixing job which I no doubt would have been charged for anyway while these clowns laugh at their poor outcome.

  2. Avataaar/Circle Created with python_avatars thisoldjeep says:

    Ave I'd watch your videos even if you were just taking a shit in a bucket. HA
    Reminds me of a work prank. Take a box or covered bucket with the above additive in it and place it off to the side or better yet in the way of the work. When your co worker asks 'whats in the box' tell 'em 'just some shit'. Then record their reaction when they open it and post it so we all get another good laugh. Thanks for the vids.

  3. Avataaar/Circle Created with python_avatars Sea-Saw says:

    If it’s still each one teach one I’m taking that bucket pressure weight gauge idea for my own.. I’ll look real clever tomorrow …

  4. Avataaar/Circle Created with python_avatars scoobtoober29 says:

    Oh for frog snacks. As a young mason tender. You cut the bag in half with a trowel or square shovel, the short way. turn it over and the two halves dump out right quick. [_|_ ] right in the middle this direction

  5. Avataaar/Circle Created with python_avatars em sea says:

    I love all your videos you need to do the simple hydraulic on the bottom of a chair next or pneumatic cylinder whatever it is thank you so much

  6. Avataaar/Circle Created with python_avatars Zak Thompson says:

    Please make a video about the Miami condo building that collapsed the other night with people sleeping inside. There’s been no explanation as to how it happened, and last I heard there were still 99 people that hadn’t been accounted for.

    I think other viewers would like to see your take on it as well.

  7. Avataaar/Circle Created with python_avatars C SMITH says:

    ''…snow mex-cans… lol so good!
    So any words on this BLDG failure in Miami.AvE.. You know that FIU bridge collapse from back in 2018' (you did videos) well FIU did a study on this same bldg. Findings Years back showing settling / movement!

  8. Avataaar/Circle Created with python_avatars cd rom says:

    hi, can you do an analysis of the florida building collapse? They suggested it might be the rust pressure that developed inside of the italian bridge collapse that you analyzed. i would like your take on it

  9. Avataaar/Circle Created with python_avatars Kizz says:

    Florida Building Collapse. Built 70' – 80's. Prefabricated units only bolted together. Did rain leaking from the roof erode a vertical columns nuts? here is a link to how they may have been made.
    Fast High-Rise construction in 1960's U.K. Archive film 30700 – YouTube, from HuntlyFilmArchives on Youtube. Just Saying.

  10. Avataaar/Circle Created with python_avatars Michael says:

    Why did the condo in FL collapse? Surveillance looked like it started from the top not the bottom. There was some serious HVAC condensers on the roof where it collapsed. The building was also sinking.

  11. Avataaar/Circle Created with python_avatars D Hawthorne says:

    Would you care to speculate on the Miami apartment tower collapse?
    55 of 136 apartments suffered at least a partial collapse as 12 stories spontaneously implode at 1am. 15 families self evacuated, over 60 families being evacuated by ladder truck, 1confirmed dead, 1 rescued and dozens more assumed trapped under the rubble.

  12. Avataaar/Circle Created with python_avatars Douglas2 Lee says:

    I don't mean to be ghoulish or insensitive, but we eagerly await your commentary and insight regarding the tragedy in Miami. God rest their souls.

  13. Avataaar/Circle Created with python_avatars Angry Engineers says:

    I've spent the last few days watching your old videos and stumbled upon your Glock 17 video and completely fucking enjoyed it. Do you have access and would you consider doing a video on the CZ-75's engineering?

  14. Avataaar/Circle Created with python_avatars Chris Jarvis says:

    Just saw a VIDEO by "Adam Savage's Favorite Tools: Reciprocating Air Saw!" and he talks about AVE and his Videos. woot. Love AVE's videos have all my employees watching his videos to learn about tools we sell.

  15. Avataaar/Circle Created with python_avatars Craig McMullen says:

    Not sure how I reach ya but these new fangled FLEX tools (Enginered in Germany πŸ‡©πŸ‡ͺ Assembled in πŸ‡¨πŸ‡³ by the Chicoms)…. Any good? Would love to see ya dissect a few on the table.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.